How to Make Framed Christmas Bauble Decor

Turn a plain picture frame and a handful of Christmas ornaments into a beautiful holiday decoration!

This easy DIY framed Christmas bauble decor features ornaments hanging at different heights inside an open frame, creating a festive display with a modern, elegant touch.

It’s beginner-friendly, takes about 30 minutes to assemble, and looks lovely on a mantel, shelf, or wall.

Materials You’ll Need

  • 1 wooden picture frame (approximately 11 × 14 inches)
  • 5 shatterproof Christmas baubles in burgundy and champagne gold, about 1.5–2.5 inches wide
  • Thin gold cord or ribbon for hanging
  • Forest-green velvet ribbon (1–1.5 inches wide) for the bow
  • Hot glue gun and glue sticks
  • Scissors
  • Ruler or measuring tape
  • Pliers or flat-head screwdriver
  • Picture-hanging hardware, if needed
  • Soft towel to protect your work surface
Tip: Choose a frame with a wide wooden edge so there's enough room to attach the hanging cords securely. A deeper shadow-box frame also works well.

Step 1: Prepare the Wooden Frame

Place your frame face-down on a soft towel. Carefully remove the backing, glass, and any metal tabs that stick out.

You’ll be left with an open wooden frame that allows the ornaments to hang freely.

Wipe the frame clean and check that the wood is smooth and free of sharp edges.

Step 2: Plan Your Ornament Arrangement

Lay the frame flat on your table and place the five baubles inside it.

Arrange them at different heights for a playful, cascading design. Position the largest ornament slightly off-center and balance it with smaller ones on either side.

Alternate burgundy and champagne-gold ornaments to create a warm, coordinated look.

Leave a little space between each ornament so they don’t touch when hanging.

Step 3: Cut and Attach the Hanging Cords

Cut five lengths of thin gold cord, making each one slightly longer than its planned hanging distance.

Gold Metallic Bakers String - 98 ft Decorative Gold Wrapping String, Thin Ribbon Golden Thread String, Glitter-Gold Cord for DIY Crafting, Gift Wrapping, Christmas Decorations, Wedding, Tags Ornaments

View on Amazon

Tie one end of each cord securely around the metal loop at the top of a bauble.

Double-knot each cord to prevent slipping, and leave the other end loose for attaching to the frame.

Step 4: Secure the Baubles Inside the Frame

With the frame lying face-down, arrange the ornaments in their planned positions.

Attach the loose ends of the cords to the back of the frame’s top wooden edge using hot glue. Keep the attachment points spaced apart.

Allow the glue to cool completely before carefully lifting the frame upright.

Check the arrangement and adjust any cords if needed. Make sure the baubles hang freely without touching the bottom or sides of the frame.

Tip: For a stronger hold, tie the cords around small screw eyes installed in the wooden frame instead of relying on hot glue alone.

Step 5: Make a Velvet Ribbon Bow

Cut a length of forest-green velvet ribbon and tie it into a full, soft bow.

Adjust the loops until both sides look balanced, then trim the ribbon tails at an angle for a neat finish.

Tsorode 10 Yards Dark Green Velvet Ribbon for Christmas Tree, 1 Inch

View on Amazon

Attach the bow to the upper-left corner of the wooden frame using a small amount of hot glue.

The deep green ribbon adds a lovely contrast to the warm wooden frame and metallic ornaments.

Step 6: Display Your Christmas Bauble Frame

Once everything is secure, your framed Christmas bauble decoration is ready!

Place it upright on a mantel or sturdy shelf, leaning it safely against the wall. You can also hang it using appropriately rated picture-hanging hardware.

A cream or neutral-colored wall makes the burgundy and champagne ornaments stand out beautifully.

For an extra festive touch, place a few pinecones or small evergreen branches nearby without crowding the frame.

A Simple Trick for Keeping the Baubles Looking Their Best

If your ornaments twist and face different directions, gently rotate their hanging cords until the arrangement looks balanced. A tiny removable adhesive dot between the back of a lightweight bauble and the wall can help keep it facing forward when the frame is displayed against a solid surface.

Keep the decoration away from heaters, direct sunlight, and areas where it might get knocked over. This helps protect the ribbon, glue, and ornaments throughout the holiday season.